Basic Info.
Model NO.
HG/T 3796.10-11
Type
Agitated Transmission Device
Transport Package
Wooden Case
Specification
50-50000 Liters
Product Description
PRODUCTS DESCRIPTIONAn agitator/stirrer is a device or mechanism that mixes and evenly distributes reactants in a chemical reactor/mixer to promote the reaction of reactants or physical mixing, it is an important component of the reactor/mixer. The principle is to mix reactants through an agitator/stirrer in order to increase the contact area between reactants and reduce the mass transfer resistance between reactants, thereby improving the reaction rate and efficiency, reducing the volume and reaction time of the reactor, and thereby reducing energy consumption. At the same time, the agitator/stirrer can also ensure a uniform distribution of temperature and pH during the reaction process, thereby improving the quality and stability of the reaction. The existence of agitators is to improve the mass and heat transfer efficiency of reactions within a controllable range, to improve reaction efficiency and quality, and save time and products costs.
In general, an agitator usually consists of one or several layer impellers (blades set) and a main shaft. Main shaft is a power transfer part, impeller is a rotating part assembled on the main shaft for helps enhance the flow of a fluid. Agitators can come in many materials, sizes and varieties, depending on the application. In principle, it should be selected in combination with the agitation purpose, flow state, media viscosity, stirring speed, vessel volume, even reaction kinetics and transfer requirements. The impeller/blades can be divided into two types: fixed and detachable.
Helical Ribbon type agitator consisting of a screw-shaped belt (one- or two-way) that close to the vessel wall. The agitation effect is based on the drag effect of the spiral in the axial direction. Mainly application for mixing, heat transfer of high viscosity fluid or fliud with high content solid.
The structure of screw type agitator have the shaft wound by a screw-shaped belt. The agitation effect is based on the drag effect of the spiral in the axial direction. Mainly application for mixing, heat transfer of high viscosity fluid or fliud with high content solid.
Helical Ribbon+Screw type agitator have the different direction screw-shaped belt by shaft to the ribbon for strengthen axial circulation.
National Standard Design Of Helical Ribbon Type Agitatior/Stirrer (HG/T 3796.1-2005 ) | Type/ Parameters | Helical Ribbon | Standard | HG/T 3796.11-2005 |
| Blade Number | | =1 or 2 |
| Flow Pattern | Axial |
| Baffle and Draft Tube | 0 |
Viscosity
(cP/mPa.s) | <500000 |
Tip speed
(m/s) | <2 |
| Structure | |
| Type/ Parameters | Screw | Standard | HG/T 3796.10-2005 |
| Blade Number | | ≥ 2 |
| Flow Pattern | Axial |
| Baffle and Draft Tube | 0/1(if need) |
Viscosity
(cP/mPa.s) | <100000 |
Tip speed
(m/s) | <2 |
| Structure | |
| Type/ Parameters | Standard | DIN28131-2018 Application
for DIN 28136 Agitator vessels - Part 1: Principal dimesions |
| Classification | Helical Ribbon Agitator |
| Blade Number | | Z1 =1 or 2 |
| Baffle Number | Z3 =0 |
| Max. Viscosity (cP/mPa.s) | 50000 |
| Tip speed (m/s) | 0.3 to 3 |
Direction of rotation
(See from driving device to agitator) | CW |
| Tip speed apply to the viscosity ranges,the ratio of specific agitating capacity (kW/m3) | 0.2 to 2 |
The technical parameters of the agitator are very important for the selection and work of the agitator. When selecting an agitator, it is necessary to comprehensively consider parameters such as power, speed, volume, material, dimension, and control method to ensure that the agitator can meet the production requirements of the mixed materials. At the same time, it is also necessary to pay attention to the safety and reliability of the agitator to ensure the smooth progress of the production process. By selecting the technical parameters of the agitator reasonably, it can be improving production efficiency, reducing costs, and ensuring the stability of product quality.
The power parameters of the agitator refers to the electrical or mechanical power required to drive the agitator to rotate. The power of the agitator is related to factors such as the properties, viscosity, volume of the stirred material, and the structure, speed of the agitator. Generally, the higher power of the agitator effects its stirring better. Therefore, when selecting an agitator, it is necessary to determine the required power parameters based on actual needs.
The speed parameters of the agitator is closely related to the characteristics of the stirred material. For materials with high viscosity, a lower rotational speed is generally required to achieve uniform mixing; For materials with lower viscosity, higher rotational speeds can be used. Therefore, when selecting an agitator, it is necessary to determine the appropriate rotational speed parameters based on the characteristics of the stirred material.
The volume parameter of the agitator refers to the maximum volume of stirred materials that the agitator can accommodate. The volume parameters of the mixer should be determined based on actual needs to ensure that it can meet the production requirements of the stirred materials. The volume parameters of the agitator should be determined based on the limitations of the production site and the volume requirements of the stirred materials. If the volume of the agitator is too small, it will not be able to accommodate enough stirred materials, thereby affecting production efficiency; If the volume parameter is too large, it will increase the cost and floor area of the equipment.The material parameters of the agitator refer to the material used for making the agitator. The material parameters of the agitator should be determined based on the characteristics of the stirred materials and the requirements of the production environment. Generally, the material of the agitator should have good strength, corrosion resistance, and wear resistance to ensure the long-term stable operation of the equipment.
The dimension parameters of the agitator should be determined based on the limitations of the production site and the volume requirements of the stirred materials. If the dimension of the agitator is too large, it will increase the cost and floor area of the equipment; If the dimension is too small, it cannot meet the production requirements of the stirred materials.The control parameters of the agitator refer to the control method of the agitator driving device. Common control methods for agitator include manual control, automatic control, and remote control. Different control methods are suitable for different production environments and operational requirements. When selecting an agitator, it is necessary to determine appropriate control parameters based on actual needs.
FAQFor we can quote accurately and supply quality products, please provide technical data along with your inquiry as such:1) Required design and working pressure, temperature of equipment2) The corrosion performance or PH value of working medium (if have)3) Connect flange standard 4) Power supply - Voltage, Frequency, Explosion proof and protection class according with field application5) Equipment operating ambient - Installation site(Room/outdoor installation, heated/unheated room), class of hazardous and fire hazardous area, climatic version and category of locationCONTACTSHANDONG PIONEER HEAVY INDUSTRY TECHNOLOGY CO.,LTD.
Address : Changwang Industrial Park, Liushan Town, Linqu County, Weifang City, Shandong Province, P.R.China
Mr. Conan WEI
Address:
Changwang Industrial Park, Liushan Town, Linqu County, Weifang, Shandong, China
Business Type:
Manufacturer/Factory, Trading Company, Group Corporation
Business Range:
Chemicals, Electrical & Electronics, Industrial Equipment & Components, Instruments & Meters, Manufacturing & Processing Machinery, Service
Management System Certification:
ISO 9001, ISO 14001
Company Introduction:
Shandong Pioneer Heavy Industry Technology Co., Ltd. is a professional design, manufacture, exporter in glass lined chemical equipment and other chemical equipment with advanced technology, completed production equipment, perfect quality control system and intimate sale and after- sale service.
The company have passed the certification of ISO 9001: 2015 and been approved by government to design & Produce glass lined equipment and chemical equipment as well as pressure vessels of category I and II. And adopt the same testing methods and production processes as well-known foreign companies to guarantee the quality of glass lined equipment and other chemical equipment.
The products included of various standard or none-standard specifications of chemical reactor, storage tank/receiver, distillator, film evaporator, vacuum dryer, filter, separator, metering vessels, heat exchanger, condensers, column systems and various accessories. The company also can specializes in GMP standard products and customized operating unit of chemical process.
Shandong Pioneer Heavy Industry Technology Co., Ltd. Belongs to PIONEER GROUP which have more than 20 years experience specialized on manufacturing glass lined equipment and other chemical equipment, and products have been exported to India, Russia, Thailand, Vietnam, Malaysia, Taiwan, Mexico as well as other countries and regions. We sincerely welcome customers from all over the world to visit our company. We will satisfy you with quality products and considerate services.
){kind=link}